I've ordered the lunch box and this video is very informative I've only just come across your channel I've subscribed thank you great video from Cardiff South Wales UK 🏴👍👍👍👍👍
Your Lunch Box clearly runs smoother than just about any I've seen with the mods you put together. I'm building a new one right now- thanks for the informative video.
That was a really nice video, I am happy I found it, I can see it is brand new! Very helpful, I am building a Lunchbox right now, so it's perfect timing! I'll be doing double wishbone suspension front also, I have some nylon sheet, so I'll try cut it out and make own a-arms, never tried that before, ha ha! Nice and well presented video, you seem like a nice guy, I subscribed, now I'll try watch another one of your videos also. 😃
I used some after market kit for my front arms, but if you’re making your own arms, it could be even better if you make the arm a little longer so it handles even better?
Love your work Boss. I'm currently building an all black L/B, I call it the HANGMAN (thank you Led Zepplin) I will be using your tips in the mod's to it. Thanks for the examles, and keep on truckin'
Thanks for sharing your video. Those are very nice mods that have you done. What kind of A arms that you're using? Btw, I thought I was the first one to have white rooftop 😅
Hey terrific brreakdown of your choice mods! Thank you. I am currently doing a few of these on mine. I have yet to find a suitable front brace for between the shocks and I am a little unsure about what to get for the wishbone set up. Thanks!
Thanks for your comment! For the brace, I just used a 3mm threaded rod and a aluminum tube, cut them in a desired length. I got my front arms from Team CRP off eBay, but you can also get a 3D printed kit from AMPRO Engineering via Shapeways market place. I bought mine from CRP because it’s pretty reasonable. Hopefully you can find something for yours.
Thanks for commenting! I simply used the oil that came with the CVA shock set. But I would recommend to put super light oil for the rear, otherwise the rear can be too stiff compared to the front.
Front arms for LB and GH (and Hornet) are same. Upper arm mount location is the difference between the two. The kit I used for my LB would work for GH, you just need to find a spot to mount the upper arm(which isn’t included in the kit).
Авто/Мото
Straight to the point. Good recommendations. Good video!
That lunchbox is so sick!!!! You’re so good at driving!!!! Sick track and sick angles!!!
Thanks buddy!!
I've ordered the lunch box and this video is very informative I've only just come across your channel I've subscribed thank you great video from Cardiff South Wales UK 🏴👍👍👍👍👍
Thanks! Glad you liked the information in the vid. Good luck with your journey with your new Lunchie!!
Luv it sir. Thanks 🙏
Nice video 👍 Seems to run very well 🙂
Your Lunch Box clearly runs smoother than just about any I've seen with the mods you put together. I'm building a new one right now- thanks for the informative video.
Thank you for kind words! Good luck with your Lunchie!!
GOOD INFORMATION ON MODIFICATION RECOMMENDATIONS CONGRATULATIONS NO LIMITATIONS ON ALL YOUR CREATIONS ENJOY YOUR RC CAR DRIVING RELAXATIONS 👍 THANKYOU
That was a really nice video, I am happy I found it, I can see it is brand new! Very helpful, I am building a Lunchbox right now, so it's perfect timing! I'll be doing double wishbone suspension front also, I have some nylon sheet, so I'll try cut it out and make own a-arms, never tried that before, ha ha!
Nice and well presented video, you seem like a nice guy, I subscribed, now I'll try watch another one of your videos also. 😃
I used some after market kit for my front arms, but if you’re making your own arms, it could be even better if you make the arm a little longer so it handles even better?
Love your work Boss. I'm currently building an all black L/B, I call it the HANGMAN (thank you Led Zepplin) I will be using your tips in the mod's to it. Thanks for the examles, and keep on truckin'
Thank you for your comment Michael! Good luck with your journey with your Hangman!
Danke! 👍
thanks for the thoughtful tips sir! 💯✌
Thanks! Hope it helped you some.
@@rcfantasy8406 its in planning stage, for sure it helps!
Thanks for sharing your video. Those are very nice mods that have you done. What kind of A arms that you're using? Btw, I thought I was the first one to have white rooftop 😅
Thanks for your advices. Which oil grade do you use for front and rear shocks? Thx Regards
Very nice... arigato
Hey terrific brreakdown of your choice mods! Thank you. I am currently doing a few of these on mine. I have yet to find a suitable front brace for between the shocks and I am a little unsure about what to get for the wishbone set up. Thanks!
Thanks for your comment! For the brace, I just used a 3mm threaded rod and a aluminum tube, cut them in a desired length. I got my front arms from Team CRP off eBay, but you can also get a 3D printed kit from AMPRO Engineering via Shapeways market place. I bought mine from CRP because it’s pretty reasonable. Hopefully you can find something for yours.
great job on you front suspension, it seems really smooth compared to mine ;)
Yeah the kit I used works pretty good👍 thanks for your comment!!
Only kit I know of is the sand scorcher that comes with bearings .might be a few more but wouldn’t of thought so
I have a lunch box it's just standard but I'm gonna get shocks and bearing for it.
This is a very helpful video. Thank you, Do you have a link for the double wishbone parts?
www.ebay.com/itm/354220576471
This is what I put on mine. Hope this helps you.
@@rcfantasy8406 Thanks a lot.
Thanks for the vid mate, it was excellent. Do you remember what weight oil you used in the shocks?
Thanks for commenting! I simply used the oil that came with the CVA shock set. But I would recommend to put super light oil for the rear, otherwise the rear can be too stiff compared to the front.
@@rcfantasy8406 Thanks mate, much appreciated :)
Do they sell the double wishbone suspension for the grasshopper too?
Front arms for LB and GH (and Hornet) are same. Upper arm mount location is the difference between the two. The kit I used for my LB would work for GH, you just need to find a spot to mount the upper arm(which isn’t included in the kit).
私はノーマルモータですが始動時にウィリーしますよ。
それは羨ましいですね。もしかしたら私のはサスを弄ってるのでその辺のバランスが変わってるのかもしれませんね。
コメントありがとうございます👍🏻